Setting the Feed Mode
You can use continuous or on-demand printing. On-demand printing allows
you to remove a label before printing the next one.
To change the setting, from the Main Menu, select Setup, then Supply.
Then, follow these steps.
1. Press or until you see
SUPPLY
Feed Mode
2. Press Enter/Pause to set the feed mode. The current setting is
displayed, for example:
FEED MODE
Continuous
3. Press or to see the other option. After you display the option you
want, press Enter/Pause. Press Escape/Clear until you see the Main
Menu.
4-6 Operator's Handbook
To Next Page
Loading...
