Moog CURLIN INFUSION PainSmart - Procedure for Checking Pumps Between Patients

106
Additional graphics below show how to install the Pole Clamp on the Lock Box.
Figure 8.4 Pole Clamp and Safety Shell Installation
Pump Holster (340-0111)
This accessory is a simple “slide pump in” case with a pole clamp-mounting bracket on the back,
allowing the pump to securely be mounted onto a pole and yet allow the user easy access to the display,
keypad, controls, battery compartment, and connectors for external power or communications.
Figure 8.5 Pump “Holster”
Align and slide the Lock Box
over the Pole Clamp until the
Latch is locked in place
Press Latch
lever to release
Moog Curlin Medical
Holster with pole mount to
be attached to an IV pole.
The back of the holster
slides onto the pole mount
and locks securely into place.