48
Power Status Screen
This screen displays the active power source of the pump, whether internal (batteries) or external
power. If the active source is the C-cell batteries, a bar graph will indicate the amount of power
remaining in the batteries. This graph is only an approximation of the charge left and is not
intended to give a specific representation of battery life. The display will again automatically move
to the next screen:
Preventive Maintenance Screen
The above alert screen will appear after the Welcome Screen only when the maintenance due
date has arrived and will continue to appear until the date has been reset during the actual
maintenance performance. The pump may continue to be used after the maintenance due date
but should be returned for its routine maintenance at the earliest opportunity.
Select Program or BioMed Setup Screen
This screen is the first requiring you to act. It gives two selections from which to choose,
“PROGRAM,” “LIBRARY” or scroll down two screens from Library to “BIOMED SETUP.”
Using the up or down arrows, move the cursor to the desired field and then press the ENTER key.
Selecting “PROGRAM” allows you to proceed with choosing features and entering data required
for the pump to deliver a prescribed therapy.
Selecting “LIBRARY” allows you to enter customized library and choose pre-programmed
prescription to deliver therapy. Library is an optional feature on some pumps.
To Next Page
Loading...
