Moog CURLIN INFUSION PainSmart - Changing Date and Time; Change Date and Time Screen

55
13. CHANGE CONTRAST: The contrast on the display screen is automatically optimized and is
no longer changeable with this option.
Changing Date and Time
14. CHANGE DATE AND TIME: When this field is selected, the screen on the left appears:
Change Date and Time Screen
is screen is used to set the system Real Time Clock in the pump and will change the date and
time displayed on the Welcome Screen.
Note: The time must be reset to accommodate daylight savings time changes and also at any
time the pump is moved into a dierent time zone.
a. Time Format: You have the option of selecting a twelve-hour or twenty-four-hour time
format. Press the NO key until the correct selection appears on the eld and then press the
YES/ENTER key to accept the selection and move the cursor to the next eld.
b. AM/PM: e second eld allows you to select AM or PM when the twelve-hour time format
is selected in the previous eld. If the twenty-four-hour format was selected, this eld will
not appear. Press the NO key until the correct selection appears on the eld, and then press
the YES/ENTER key to choose the selection and move the cursor to the next eld.
c. Time: Use the numeric keys to enter the correct time and then press the YES/ENTER key
to accept and move the cursor to the next eld.
d. Using the numeric keys, enter the correct mm/dd/yy, using two digits for each (e.g., if the
month is January, enter 01; if it is a single digit date, use the number preceded by a 0 and
then enter the last two digits of the year code, 00, 01, etc.). When the date is correct, press
the YES/ENTER key to accept and move to the next eld.
e. A nal prompt will be given to “ACCEPT? YES/NO.” If any data needs to be corrected,
use the arrow keys to locate the correct eld, press NO to change the data, enter the
correction(s), and then press YES/ENTER again to accept the correction. Move the cursor
back to the “ACCEPT? YES” eld and press YES/ENTER. is action enters the new time
and date and moves to the next eld in the BioMed Setup Menu. Pressing the NO key on
this eld aborts the change date and time selection and returns to the BioMed Setup Menu.
Basics Programming