Moog CURLIN INFUSION PainSmart - Basics of Programming; Types of Display Screens; Sample of an Action Field Screen; Sample of a Selection List Field

45
Basics of Programming
The Moog Curlin Infusion pump allows the operator to customize this device to meet the specific
infusion needs of each individual patient. This chapter will explain the customizing features along with
the programming steps.
rogramming the Moog Curlin Infusion pump requires initial orientation and training,
but the programming steps have been designed to be user friendly and self-prompting to
minimize training time.
Several different types of screens and fields may appear on the displays. Each of the
different types of screens is explained below. Whenever you are required to interact with
the pump, a highlight bar or cursor will be present on the screen.
Types of Display Screens
1. An Action Field Screen allows you to select a pump action from the menu.
Sample of an Action Field Screen
To select a eld other than the one highlighted, use the arrow keys to move the cursor up or
down to the desired eld. When the cursor is highlighting the correct eld and you press the
YES/ENTER key, the pump accepts the selection and executes that action. In the example
above, the pump would proceed with steps to resume the therapy.
2. A Selection List field allows you to select from a predetermined list of values:
Sample of a Selection List Field
The above example allows you to select which unit to use in programming—e.g., Units: mL, mg
or mcg. Only one selection is displayed at a time. When the cursor blinks it is indicating that no
selection has yet been accepted. The selection displayed on the screen changes each time you press
the NO/CHANGE key. Pressing the YES/ENTER key accepts the selection displayed and moves
the cursor to the next field.
Chapter
4
P
In this sample, the highlight
bar is resting on the
RESUME eld.
When programming the pump outside of the LIBRARY mode, the word “Unidentied” will be
displayed on the top line of several of the screens. is indicates that the pump has been manually
programmed. “Unidentied” is a place holder where the drug name would be displayed if the
program had been chosen from the library.
Basics Programming