7 - 2 ET1 Enterprise Tablet Integrator Guide
Multi-user/AppLock Configuration
To use the Multi-user Login and Application Lock features, the administrator must create user and group
account information using the Enterprise Administrator application.
Enterprise Administrator Application
Use the Enterprise Administrator application to setup user and group accounts and create the required
(Password, Group and White List) files for using the Multi-user and Application Lock features.
1. On the host computer launch the Enterprise Administrator application.
Figure 7-1
Enterprise Administrator Window
Create Users
Each person that uses the ET1 has to have a user name and password. To create a user:
1. Click + above the Users list box.
NOTE The administrator can also create the account information manually. See Manual File Configuration on
page 7-11 for more information.
NOTE .Net Compact Framework 4 or later is required to run the Enterprise Administrator. To download, go to
http://www.microsoft.com.
To Next Page
Loading...
