Settings 8 - 3
If the PIN or Password screen unlock feature is enabled, enter the PIN or password after unlocking the screen.
Set Screen Unlock Using PIN
To set the ET1 to have the user enter a PIN:
1. Touch > Settings > Location & security > Set up screen lock > PIN.
Figure 8-2
Enter PIN Screen
2. Enter a PIN (between 4 and 16 characters) then touch OK.
3. Re-enter PIN and then touch OK.
4. Touch Use tactile feedback to enable vibration when the user enters PIN.
5. Touch Home. The next time the ET1 goes into suspend mode a PIN is required upon waking.
Figure 8-3
PIN Screen
Set Screen Unlock Using Password
To set the ET1 to have the user enter a password:
1. Touch > Settings > Location & security > Set up screen lock > Password.
To Next Page
Loading...
