Motorola ET1 - Screen Unlock Using Pattern

8 - 4 ET1 Enterprise Tablet Integrator Guide
Figure 8-4 Enter Password Screen
2. Enter a Password (between 4 and 16 characters) then touch OK.
3. Re-enter Password and then touch OK.
4. Touch Use tactile feedback to enable vibration when the user enters password.
5. Touch Home, The next time the ET1 goes into suspend mode a Password is required upon waking.
Figure 8-5 Password Screen
Screen Unlock Using Pattern
To set the ET1 to have the user enter a pattern:
1. Touch > Settings > Location & security > Set up screen lock > Pattern.
2. Touch to view instructions on the screen. Watch pattern example and then touch OK.