3 - 2 ET1 Enterprise Tablet Integrator Guide
5. Touch OK. When the ET1 is connected as USB storage, the screen indicates USB storage is in use.
The ET1’s microSD card is mounted as a drive on the host computer.
Figure 3-2
USB Storage In Use Window
6. On the host computer, open a file explorer application.
7. Locate the ET1 as a removable drive and open to view contents.
8. Copy or delete files as required.
Disconnect from the Host Computer
To disconnect the ET1 from the host computer:
1. On the host computer, unmount the microSD card.
2. On the ET1, touch Turn off USB storage.
NOTE While USB storage is in use, access to the microSD card is disabled on the ET1.
CAUTION Carefully follow the host computer’s instructions to unmount the microSD card and disconnect USB
devices correctly to avoid losing information.
To Next Page
Loading...
