Motorola ET1 - Connector Pin-Outs; I;O Connector Pin-Outs; HDMI Connector Pin-Outs

A - 6 ET1 Enterprise Tablet Integrator Guide
Connector Pin-outs
I/O Connector Pin-Outs
Figure A-2 I/O Connector
HDMI Connector Pin-outs
Figure A-3 HDMI Connector
Table A-4 External Connector Pin-Outs
Pin Signal Name Description
1 Cradle Detect Tie to ground to indicate cradle insertion. Otherwise leave unconnected.
2 USB_ID Tie to ground for Host mode. Leave unconnected for Client mode.
3 External Power IN +12.0 VDC, +/- 5%, 20W
4 USB_VBUS Host mode output = +5.0 VDC, 500mA max.
Client mode Vbus input = +5.0 VDC
5 USB_D- USB Data Negative. High speed USB (480 Mbps) in both host and client
modes. Also supports Full speed USB (12 Mbps) in both host and client
modes.
6 USB_D+ USB Data Positive. High speed USB (480 Mbps) in both host and client
modes. Also supports Full speed USB (12 Mbps) in both host and client
modes.
7 Ground Ground for all charging and USB communication.
Pin 1
Pin 1