Administrator Utilities 7 - 3
Figure 7-2
User Manager Window
2. In the Username text box, enter a user name. The text is case sensitive and required.
3. In the Password text box, enter a password for the user. The text is case sensitive and required.
4. In the Retype Password text box, re-enter the user password.
5. Select the Admin checkbox to set the user to have administrator rights.
6. Select the Enabled checkbox to enable the user.
7. Click OK.
8. Repeat steps 1 through 7 for each additional user.
Add Packages
Create a list of installed applications (packages) on the ET1 that are available for use by all the users.
1. Click + next to Packages.
Figure 7-3
Package Information Window
NOTE All system applications that are on the default image are available to all users.
NOTE To get a list of all the applications (packages) on the ET1 see Determining Applications Installed on
the ET1 on page 7-12.
To Next Page
Loading...
