CHAPTER 3 USB COMMUNICATION
Connecting to a Host Computer via USB
Connect the ET1 to a host computer using the USB/Charge Cable or Single-slot USB Docking Cradle to
transfer files between the ET1 and the host computer.
1. Setup the ET1 and either the USB/Charge Cable or the Single-slot USB Docking Cradle. See Chapter 2,
Accessories for setup information.
2. Place the ET1 into the cable cup or the cradle. USB Connected appears on the Status bar.
3. Open the Notifications panel and touch USB connected. The USB Mass Storage screen displays.
Figure 3-1
USB Mass Storage Screen
4. Touch Turn on USB storage. The Turn on USB Storage dialog box appears.
CAUTION When connecting the ET1 to a host computer and mounting its microSD card, follow the host
computer’s instructions for connecting and disconnecting USB devices, to avoid damaging or
corrupting files.
CAUTION Ensure that all applications are not running. Loss of data may occur.
To Next Page
Loading...
