CHAPTER 1 GETTING STARTED
Introduction
This chapter provides information about the ET1, accessories, charging, and resetting the ET1.
Unpacking the ET1
Carefully remove all protective material from the ET1 and save the shipping container for later storage and
shipping. Verify that you received the following equipment:
•
ET1
•
Lithium-ion battery
•
Regulatory Guide
•
Quick Start Guide.
Inspect the equipment. If any equipment is missing or damaged, contact the Motorola Solutions Global
Customer Support immediately. See Service Information on page xv for contact information.
Prior to using the ET1 for the first time, remove the protective shipping film that covers the scan window,
display and camera window.
Getting Started
To start using the ET1 for the first time:
1. Install SIM card in an ET1N2 with GSM (optional)
2. Install the main battery.
3. Charge the ET1.
4. Power on the ET1.
5. Activate the ET1N2 on a mobile data network (optional).
To Next Page
Loading...
