Motorola ET1 - Viewing Key List; Delete a Key

7 - 14 ET1 Enterprise Tablet Integrator Guide
Figure 7-9 Enter Key Dialog Box
5. In the Enter key text box, enter the key name followed by the key value obtained in step 1, using the
following format:
<Key Name> <Key value in Hex string>
Example: key2 1234567890abcdef1234567890abcdef1234567890abcdef1234567890abcdef
The key value must be a 64 hexadecimal character string.
6. Touch OK. The key is imported into the ET1. The message successfully installed the key appears on the
screen.
Viewing Key List
To view a list of keys installed on the ET1:
1. Touch Key List. A list of keys appears.
Figure 7-10 List of Keys
2. Touch OK.
Delete a Key
To delete a key from the ET1:
1. Touch Revoke Key.
2. Touch the key to deleted.
3. Touch OK.