2 - 2 ET1 Enterprise Tablet Integrator Guide
2-way Charge Cable 25-153150-01R Connects one power supply to:
•
one Four-slot Charge Only Docking Cradle and
one Four-slot Battery Charger
•
two Four-slot Battery Chargers.
US AC Line Cord (3-wire) 23844-00-00R Provides power to the power supplies.
International AC line Cord - Provides power to the power supplies. Purchase
separately.
Miscellaneous
Spare Battery BTRY-ET01EAB0E
BTRY-ET01EAB0E-10
Replacement 4620 mAh battery.
Replacement 4620 mAh battery (10-pack).
Handstrap SG-ET0123245-01R Adjustable and 360-degree rotatable handstrap that
mounts on the back of the ET1 and provides secure
option for holding the device.
Scanning Module SCANMOD-ET1 Provides 1D and 2D bar code scanning.
Scanning/MSR Module MSRSCAN-ET1 Provides 1D and 2D bar code scanning and magnetic
stripe card reading.
Protective Rubber Bezel KT-161552-01R Adds additional protection for the ET1.
Table 2-1
ET1 Accessories (Continued)
Accessory Part Number Description
To Next Page
Loading...
