Figure 130: Download Complete Screen
12 On completion, press ENT to return to the Bootloader menu to select the next file to download.
13 To exit Bootloader, select Exit from the Bootloader main screen and press ENT.
Loading Files via USB
Use Bootloader to download customized flash file system partitions to the mobile computer and load hex files to the
flash memory of the MC32N0.
Procedure:
1 Download the USBDownload application from the Support Central web site. Follow the installation instructions
with the application.
2 Connect the MC32N0 to a host computer using the Single Slot Serial/USB Cradle or USB Charge Cable.
3 On the host computer, launch the USBDownload application.
Figure 131: USB Download Window
4 Simultaneously press the Power button and the 1 and 9 keys.
5 Immediately, as soon as the device starts to boot, press and hold the left scan button or trigger.
6 Continue to hold the scan button or trigger while releasing the 1, 9 and Power keys until the Bootloader screen
appears.
7 When the Bootloader screen appears, release the scan button or trigger.
Figure 132: Bootloader Menu
Application Deployment for Windows CE | 153
MN000887A01-B | April 2015
To Next Page
Loading...
Need help?
General