Calls
This chapter explains the operations to receive,
respond to, make, and stop calls.
You can select a subscriber alias or ID, or group alias
or ID after you have selected a channel by using one
of these features:
Programmed
One Touch
Access Button
This method is used for Group,
Private, and Phone Calls only.
Note:
You can only have one
ID assigned to a One
Touch Access button
with a short or long
programmable button
press. Your radio can
have multiple One
Touch Access buttons
programmed.
Programmable
Button
This method is used for Phone
Calls only.
Group Calls
Your radio must be configured as part of a group to
receive a call from or make a call to the group of
users.
Responding to Group Calls
Follow the procedure to respond to Group Calls on
your radio.
When you receive a Group Call:
• The green LED blinks.
• Your radio unmutes and the incoming call sounds
through the speaker.
1 Do one of the following:
•
If the Channel Free Indication feature is
enabled, you hear a short alert tone the
moment the transmitting radio releases the
PTT button, indicating the channel is free for
you to respond. Press the PTT button to
respond to the call.
•
If the Voice Interrupt feature is enabled,
press the PTT button to stop the current call
from the transmitting radio and free the channel
for you to respond to the call.
25
English
To Next Page
Loading...