• Stop and restart a scan via the programmed
Scan button or menu.
• Change the channel via the Channel Selector
Knob button
Vote Scan
Vote Scan provides you with wide area coverage in
areas where there are multiple base stations
transmitting identical information on different analog
channels.
Your radio scans analog channels of multiple base
stations and performs a voting process to select the
strongest received signal. Once that is established,
your radio unmutes to transmissions from that base
station.
During a vote scan, the yellow LED blinks.
Follow the same procedures as Responding to
Transmissions During Scanning on page 36 to
respond to a transmission during a vote scan.
Call Indicator Settings
Alarm Tone Volume Escalation
Your radio can be programmed by your dealer to
continually alert you when a radio call remains
unanswered.
This is done by automatically increasing the alarm
tone volume over time. This feature is known as
Escalert.
Call Alert Operation
Call Alert paging enables you to alert a specific radio
user to call you back when they are able to do so.
This feature is accessible via a programmed One
Touch Access button.
Responding to Call Alerts
Follow the procedure to respond to Call Alerts on
your radio.
When you receive a Call Alert:
• A repetitive tone sounds.
• The yellow LED blinks.
37
English
To Next Page
Loading...