• The yellow LED turns off once the radio locks
on to a site.
Stopping Automatic Site Search
Follow the procedure to stop automatic site search.
Press the programmed Site Lock On/Off button.
• A tone sounds.
• The LED turns off.
Starting Manual Site Search
Follow the procedure to start manual site search.
Press the programmed Manual Site Roam button.
• A tone sounds.
• The green LED blinks.
If the radio is locked to a site:
• A positive indicator tone sounds.
• The LED turns off.
If the radio is unable to lock to a site:
• A negative indicator tone sounds.
• The LED turns off.
Lone Worker
This feature prompts an emergency to be raised if
there is no user activity, such as any radio button
press or activation of the channel selector, for a
predefined time.
Following no user activity for a programmed duration,
the radio pre-warns the user via an audio indicator
once the inactivity timer expires.
If there is still no acknowledgment by the user before
the predefined reminder timer expires, the radio
initiates an Emergency Alarm.
Only one of the following Emergency Alarms is
assigned to this feature:
• Emergency Alarm
• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
The radio remains in the emergency state, allowing
voice messages to proceed until action is taken. See
Emergency Operation on page 38 for more
information on ways to exit Emergency.
45
English
To Next Page
Loading...