EasyManua.ls Logo

Motorola MOTOTRBO DP3441 - Making Selective Calls; Phone Calls; Responding to Phone Calls as Group Calls

Motorola MOTOTRBO DP3441
568 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
3 Release the PTT button to listen.
The call ends when there is no voice activity for a
predetermined period. A tone sounds.
Making Selective Calls
Your radio must be programmed for you to initiate a
Selective Call. Follow the procedure to make
Selective Calls on your radio.
1 Select a channel with the active subscriber alias or
ID.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3 Press the PTT button to make the call.
The green LED lights up.
4 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
5 Release the PTT button to listen.
The green LED lights up when the target radio
responds.
6
If the Channel Free Indication feature is
enabled, you hear a short alert tone the moment
the transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
Press the PTT button to respond to the call.
The call ends when there is no voice activity for a
predetermined period.
Phone Calls
Responding to Phone Calls as Group Calls
Follow the procedure to respond to Phone Calls as
Group Calls on your radio.
When you receive a Phone Call as a Group Call:
The LED blinks green. Your radio unmutes and
the incoming call sounds through the radio's
speaker.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
2 Press the PTT button to respond to the call.
Calls
30
English

Table of Contents

Related product manuals