Note:
Check with your dealer or system
administrator for more information.
Password Lock Features
This feature allows you to access your radio via
password upon powering up.
Accessing Radios by Using Passwords
Follow the procedure to access your radio by using a
password.
1 Power up the radio.
A continuous tone sounds.
2 Enter the current four-digit password
• Use the Channel Selector Knob to enter the
first digit of the password.
• Press Side Button 1, 2 or 3 to enter each digit
of the remaining three digits of the password.
3 Your radio automatically checks the validity of the
password, after the last digit of the four-digit
password is entered.
If successful, the radio powers up.
If unsuccessful:
• You hear a continuous tone. Repeat Steps 2
and 3..
• After the third attempt, your radio enters into
locked state. A tone sounds. The yellow LED
double blinks. Your radio enters into locked
state for 15 minutes.
Unlocking Radios in Locked State
Your radio is unable to receive any call, including
emergency calls, in locked state. Follow the
procedure to unlock your radio in locked state.
1 Power up the radio.
Your radio restarts the 15-minutes timer for locked
state.
2 Wait for 15 minutes.
Your radio responds only to On/Off button in
locked state.
3 Repeat the steps in Accessing Radios by Using
Passwords on page 46 to access the radio.
46
English
To Next Page
Loading...