ARTS-Out-of-
Range Alert
A tone sounds. The LED
rapidly blinks red.
Note:
Check with your dealer or system
administrator for more information.
Over-the-Air Programming
Your dealer can remotely update your radio via Over-
the-Air Programming (OTAP) without physical
connection. Additionally, some settings can also be
configured via OTAP.
When your radio undergoes OTAP, the green LED
blinks.
When your radio receives high volume data:
• The display shows the High Volume Data icon.
• The channel becomes busy.
• A negative tone sounds if you press the PTT
button.
Note:
Once the programming is complete, a tone
sounds, and your radio restarts (powers off
and on again).
Wi-Fi Operation
Wi-Fi
®
is a registered trademark of Wi-Fi Alliance
®
.
Note:
This feature is applicable to DP3441e only.
This feature allows you to setup and connect to a Wi-
Fi
®
network. Wi-Fi supports updates for radio
firmware, codeplug, and resources such as language
packs and voice announcement.
Turning Wi-Fi On or Off
Note:
This feature is applicable to DP3441e only.
The programmed Wi-Fi On or Off button is
assigned via CPS. Check with your dealer or
system administrator to determine how your
radio has been programmed.
You can turn on or turn off Wi-Fi
®
by performing the
following action.
Press the programmed Wi-Fi On or Off button.
Voice Announcement sounds Turning On Wi-Fi or
Turning Off Wi-Fi.
49
English
To Next Page
Loading...