Bluetooth
This feature allows you to use your radio with a
Bluetooth-enabled device (accessory) via a Bluetooth
connection. Your radio supports both Motorola and
COTS (Commercially available Off-The-Shelf)
Bluetooth-enabled devices.
Bluetooth operates within a range of 10 meters line of
sight. This is an unobstructed path between your
radio and your Bluetooth-enabled device. It is not
recommended that you leave your radio behind and
expect your Bluetooth-enabled device to work with a
high degree of reliability when they are separated.
At the fringe areas of reception, both voice and tone
quality will start to sound "garbled" or "broken". To
correct this problem, simply position your radio and
Bluetooth-enabled device closer to each other (within
the 10-meter defined range) to re-establish clear
audio reception. The Bluetooth function of your radio
has a maximum power of 2.5 mW (4 dBm) at the 10-
meter range.
Your radio can support up to 3 simultaneous
Bluetooth connections with Bluetooth-enabled
devices of unique types. For example, a headset, a
scanner, and a PTT-Only Device (POD). Multiple
connections with Bluetooth-enabled devices of the
same type are not supported.
Refer to the user manual of your respective
Bluetooth-enabled device for more details on the full
capabilities of your Bluetooth-enabled device.
Note:
Your radio connects to the Bluetooth-enabled
device within range with either the strongest
signal strength, or to one which it has
connected to before in a prior session.
Connecting to Bluetooth Devices
Follow the procedure to connect your radio with other
Bluetooth devices.
1 Turn on your Bluetooth-enabled device and place
it in pairing mode.
2 Press the programmed Bluetooth Connect button
on your radio.
• A tone sounds.
• The yellow LED blinks.
47
English
To Next Page
Loading...