3 Your Bluetooth-enabled device may require
additional steps to complete the pairing. Refer to
the user manual of your Bluetooth-enabled device.
Do not turn off your Bluetooth-enabled device
during the finding and connecting operation as this
cancels the operation.
If successful:
• A positive indicator tone sounds.
If unsuccessful:
• A negative indicator tone sounds.
Note:
A pin code may be required to be programmed
in your radio before it can pair with some
devices. Contact your dealer for more
information.
Disconnecting from a Bluetooth Device
Follow the procedure to disconnect your Bluetooth
device.
Press the programmed Bluetooth Disconnect
button.
A positive indicator tone sounds when the device has
been disconnected.
Switching Audio Route between Internal Radio Speaker
and Bluetooth Device
Follow the procedure to toggle audio routing between
internal radio speaker and external Bluetooth device.
Press the programmed Bluetooth Audio Switch
button.
A tone sounds when the audio route has switched.
Auto-Range Transponder System
The Auto-Range Transponder System (ARTS) is an
analog-only feature designed to inform you when your
radio is out-of-range of other ARTS-equipped radios.
ARTS-equipped radios transmit or receive signals
periodically to confirm that they are within range of
each other.
Your radio provides indications of states as follows:
First-Time Alert A tone sounds.
ARTS-in-Range
Alert
A tone sounds, if programmed.
48
English
To Next Page
Loading...