Switching Audio Route between Internal
Radio Speaker and Wired Accessory
Follow the procedure to toggle audio routing between
internal radio speaker and wired accessory.
You can toggle audio routing between the internal
radio speaker and the speaker of a wired accessory
with the condition that:
• The wired accessory with speaker is attached.
• The audio is not routed to an external Bluetooth
accessory.
Press the programmed Audio Toggle button.
A tone sounds when the audio route has switched.
Powering down the radio or detaching the accessory
resets the audio routing to the internal radio speaker.
Turning Trill Enhancement On or Off
You can enable this feature when you are speaking in
a language that contains many words with alveolar
trill (rolling “R”) pronunciations. Follow the procedure
to turn Trill Enhancement on or off on your radio.
Press the programmed Intelligent Audio button to
toggle the feature on or off.
Turning GPS/GNSS On or Off
Global Navigation Satellite System (GNSS) is a
satellite navigation system that determines the radio’s
precise location. GNSS includes Global Positioning
System (GPS) and Global Navigation Satellite
System (GLONASS).
Press the programmed GPS/GNSS button to toggle
the feature on or off.
Note:
Selected radio models may offer GPS and
GLONASS. GNSS constellation is configured
via CPS. Check with your dealer or system
administrator to determine how your radio has
been programmed.
Turning Flexible Receive List On or Off
Flexible Receive List is a feature that allows you to
create and assign members on the receive talkgroup
list. Your radio can support a maximum of 16
members in the list. This feature is supported in
53
English
To Next Page
Loading...