MTR3000 Base Station/Repeater: Description 1-5
Third Party Controller Interface:
• Phone Patch
• Multi Coded Squelch Interface (Repeater Panel)
• Tone Remote Adapter
•LTR Trunking
• Passport Trunking
Optionally, the MTR3000 station may be configured with
• External Pre-selector (Not available for the 800/900 MHz band)
• Antenna Relay
• Duplexer
• External Dual Circulator Tray
• Integrated Tone Remote Control (with Wireline option)
• Integrated DC Remote Control (with Wireline option)
In addition, the following features are also included. These features are shipped in a preset
condition, but may be altered through the use of the CPS.
• 16 Tx/Rx Frequencies – Factory Programmed with 1 Tx, 1 Rx
• 12.5 kHz or 25 kHz Operation – Factory Programmed to 12.5 kHz
• 6.25e compliant
• 1 Tx and 1 Rx (PL or DPL) Squelch Code per channel – Factory Programmed to CSQ
• Base Station Identification (BSI) – Factory Programmed as BLANK
• Push-To-Talk (PTT) Priority – Factory Programmed to Repeat Path
Note
The MTR3000 Base Station/Repeater only supports the third party controllers noted above
when it is configured in analog mode.
To Next Page
Loading...
Need help?
General
