94
• To
Clear all groups from the selected scan list, press Yes.
You will be prompted to remove all groups from the
selected scan list.
•
Add a group to the selected scan list. Every added group
(including a favourite group) comes with its folder, its name
or number, and its priority (if pre-programmed).
• To select a folder, scroll through the folder list. The list
does not show folders whose groups are fully used in
the selected scan list. Press
Ok to select a folder.
• To select a group, scroll through the group list within the
selected folder. The list shows groups that are not in the
selected scan list. Press
Ok.
• To set a priority to a group, scroll through the priority list:
high, medium, or low.
A call from a high priority group will interrupt an on-
going call with a medium and low priority.
A call from a medium priority group will interrupt an on-
going call with a low priority.
A call from a low priority group will not interrupt any on-
going call.
•
Edit the scan list groups.
• Scroll to the group you wish to remove from the selected
scan list, and press
Delete. You will be prompted to
remove the selected group. After a few seconds, the
display shows the updated scan list.
• To change the group priority, press
Priority. Scroll to
the selected priority and press
Select.
6802972C35.book Page 94 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
