59
Emergency Operation
Receiving an Emergency Private Call
• The tallker’s identity is displayed when the terminal
receives the half-duplex call.
• When the
terminal receives the call, the display will show
Emergency Prvt In Use and the caller’s identity.
• If configured by your Service Provider, the screen back-
ground will be red.
• Continue the call as you would do in a half-duplex or full-
duplex call.
Modifying the Type of Call
The infrastructure can modify on-going calls as follows:
• Emergency Group Call to Emergency Private Call, and
vice versa.
• Anyone of the above to a Phone Call.
If Hot Mic is interrupted when the modification occurs, the
display will show the Hot Mic Ended message.
Continue the modified call depending on the type of call.
Emergency in DMO
General
You can initiate an Emergency Group Call to a group.
You can receive an Emergency Group Call:
• From the selected talkgroup
• From other users within talkback range (if configured by
your Service Provider). This is called an InterMNI call.
• From an open group. (An open group is a super-group to
which all DMO groups belong.)
Emergency calls can be placed via gateway. For gateway
settings, see the DMO section, page 43.
6802972C35.book Page 59 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
