48
For a full-duplex call, press and release . You will hear a ring-
ing tone. Wait for the called person to answer your call.
4. To end the call, press .
If the called person or the infrastructure end the call, the Call
Ended
message is displayed.
Other Ways of Dialing
Dialing via Contact List
You can also use the contact list to select a number you previously
stored. Press Contcs and search the stored number by scrolling
( or ) or by entering the first character of the contact name.
If the contact has more than one number stored, pickers surround
the contact icon
. Use / to select the number.
Short Number Dial
If set up by your Service Provider, Short Dial allows you to
dial part of the full number of the person you wish to call. Your
MTH800 will automatically complete the number and send it
over the air based on your own MTH800's identity. For
example:
1. Dial 456 (instead of 4282456, the full number).
2. To place the call, press the PTT
or .
3. To hang up, press
or .
Recent Calls List
Select the number from the recent call list. See “Recent
Calls” on page 96.
While Transmit Inhibit is activated, an incoming Private Call is indi-
cated, but you cannot answer the call.
If no name is stored under a letter, the
MTH800 automatically searches for-
ward, alphabetically, until the next name is found. If more than one name in
the list begins with the same letter, scroll to view other names.
6802972C35.book Page 48 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
