54
Emergency Operation
General
Emergency Operation is available in TMO and in DMO, if the
MTH800 is in service.
Dual Microphone Feature
See “How to Hold Your MTH800” on page 13.
Entering TMO or DMO
See “Selecting TMO or DMO Operation” on page 23.
Important Information
Emergency in TMO
Overview
Please check with your Service Provider for the configuration
of your terminal.
Your terminal may be configured with one of the following:
• Emergency Group Call
The terminal will enter Emergency Mode when you press
and hold the Emergency button.
• The required time you need to press the Emergency button is set by
default to 0.5 seconds. The time can be configured by your Service Pro-
vider.
• Pressing the Emergency button even if Transmit Inhibit is activated
causes immediately the MTH800 to transmit. When entering Emergency
Operation the MTH800 should not be within the RF sensitive area any
longer!
• The MTH800 interrupts the AL call when you press the Emergency but-
ton.
• For call alerts, see settings in the Vibrate menu option (page 81) and the
Tones menu option (page 85)
.
6802972C35.book Page 54 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
