Getting Started
5
Replacing the Battery
1. To remove the battery cover, push down the cover button. Slide
the cover away.
2. Push retaining clip up and then lift the top of the battery out.
3. Replace the battery.
Charging the Battery
Motorola approved chargers provide optimum performance.
Other chargers may not fully charge your Motorola Lithium-
Ion battery or may reduce the life of the battery.
The MTH800 can be either
On or Off during charging.
1. Insert the connector on the charger into the socket at the base
of the MTH800. Select the required plug adapter (UK or Euro-
pean type) and connect to the charger. Then plug the charger
into a suitable mains socket.
2. The MTH800 displays the Charger Connected message only
if the MTH800 is On when connecting the charger. If the
MTH800 is Off, the display shows an icon of the battery in
charging.
The Battery icon shows the charging status (see below).
RETAINING CLIP
Battery Charge Progress
FullEmpty
Battery Capacity
Empty Full
6802972C35.book Page 5 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
