60
Changing Folder or Group
Proceed as explained in the Group Call section, page 32.
Making an Emergency Group Call
To initiate or answer a call:
• Enter Emergency Mode by pressing the Emergency but-
ton.
• Press and hold PTT.
• Wait for the talk permit tone (if configured) and talk.
• Release PTT to listen.
Receiving an Emergency Group Call
• The display shows “Emrgncy-In Use” and the caller’s iden-
tity as a private number or an alias.
• The caller’s voice will always sound via the speaker
(unless an external earpiece is connected to the terminal).
• If configured by your Service Provider, the screen back-
ground will be red.
• If the incoming call is an InterMNI call in Emergency Mode,
you can view network information by pressing Optns and
selecting Network.
• If the incoming call is an InterMNI call not in Emergency
Mode, you can view network information by pressing Net-
work.
6802972C35.book Page 60 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
