4
Installing the Battery
1. Remove the battery from its protective clear plastic case.
2. If necessary, remove the battery cover as shown below.
3. Insert the battery top into the compartment as illustrated.
4. Carefully press the battery silver bottom downward until it clicks
into place.
5. Replace battery cover.
Status Delivered Information appearing on the MTH800 display is
shown in special print.
Indicates a prompt or message configured by
your Service Provider.
A Note contains additional information which is
relevant to the item feature.
Example Description
<User Defined>
6802972C35.book Page 4 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
