24
A
MTH800 in DMO can communicate with the trunked
system (and vice-versa) through a gateway device. To use
that feature, please enable the gateway option in your
MTH800 (see “Making a DMO Group Call via Gateway” on
page 43).
Entering TMO or DMO
Enter TMO or DMO in one of the following ways:
• From the Home display press
Optns and select Direct Mode
if the MTH800 is in TMO.
• From the Home display press Optns and select Trunked
Mode
if the MTH800 is in DMO.
• Press and select More...> Networks > Trunked
Mode if the MTH800 is in DMO.
• Press and select More...> Networks > Direct Mode
if the MTH800 is in TMO.
• Press the TMO/DMO one-touch button (if programmed by
your Service Provider).
TMO Calls
You can make and receive the following types of calls when the
MTH800 operates in Trunked Mode:
• Group Calls
• Private Calls
• Phone Calls
• PABX Calls—local (office) extension calls
• Emergency Calls
In DMO it is only possible to place Group calls and Emergency Group Calls.
Your terminal can alert you of an incoming call. Select the alert settings in
the Vibrate menu and Tones menu items.
M
E
N
U
M
E
N
U
6802972C35.book Page 24 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
