83
The Menu
Setting the Volume
Once in the menu, select 3 Set Volume.
This sub-menu allows you to adjust the
ringer, earpiece, speaker, and keypad tone
volume.
To set the volume:
1. From the main menu, select Setup >
Volume.
2. Scroll through the list.
3. Choose the required item, and press
Change.
4. Adjust the volume level. A feedback tone is heard, and a
volume level bar is displayed.
5.
Press Back to exit.
Setting the Display’s Working Language
From the main menu, select Setup >
Language
.
The display shows the current language
used. You can customize your
MTH800 to
operate in English, German, French,
Spanish, Dutch, or in a language defined by
your Service Provider. The default setting
from factory is English.
Scroll to the desired language and press
Select. The display
shows the selected language for a few seconds.
Setting Up the Data Function
You can connect the MTH800 to an external device (such as
a laptop or desktop PC). The
MTH800 will then be capable
of transmitting and receiving data from the external device.
To connect the
MTH800 accessory connector to the external
device, use cable FKN4897. The external device must run an
application complying with the TETRA standards.
Volume
Earpiece Vol: 1_
Speaker Vol: 1_
Ringer Vol: 0_
Change Done
Keypad Vol: 0_
Language
Deutsch
Français
English
Select Back
Español
Nederlands
6802972C35.book Page 83 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
