26
Your MTH800 will alert you of an incoming call depending on
the setting you selected in the Vibrate menu option (see
page 81) and the Tones menu option (see page 85).
During message editing, you will be alerted of an incoming
Group/Emergency/Broadcast Group Call if configured by
your Service Provider.
Preemptive Calling
Preemptive calling is particularly useful when you need to
speak urgently with a user whose terminal is busy in a non-
emergency voice call.
A preemptive priority call (PPC) is either an Emergency
Group Call or a Private PPC (half-duplex or full-duplex call).
The feature allows to disconnect the on-going lower priority
call and to connect to the incoming higher priority call.
To place a PPC, see the Emergency Operation and Private
Call sections in the user guide.
The MTH800 will receive the call via speaker or earpiece,
according to the setting used when the PPC is received.
Receiving a PPC is explained in the following paragraphs.
In the screens,
<Any> in Use refers to any of the non-
emergency voice calls: Group, Private, Phone, or PABX.
For call alert, see settings in the Vibrate menu option (page 81) and the
Tones menu option (page 85)
.
6802972C35.book Page 26 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
