93
The Menu
Then, the display will show the Scan Lists
sub-menu.
2. Scroll to the required list and press
View
to see the groups that belong to the list.
3. Scroll to the required group and press
View to view the group status (attached
or not attached) and priority (if pre-programmed).
4. Press
Back to return to the previous display. Then, if re-
quired, press
. You can select to delete the group
from the scan list or change its priority.
Editing Scan Lists
1. From the main
menu, select More >
Group Setup >
Scan > Scan Lists
.
2. Scroll to the required
scan list. Press
View to see the groups used in the scan
list. Press
Back to return to the previous display.
3. To edit/view the contents of a scan list, press
.
4. In the List Optns sub-menu, scroll to the required option
and press
Select.
• Rename the active scan list. (For details on text editor use,
see “Writing Text” on page 114). Enter a new name (alias)
and press
Ok. The display shows the new setting.
• Check
the capacity of the active scan list (number of
groups stored in the list).
If the Network List is empty, it will not be displayed.
• The options below cannot be used for the Network List.
• If the Network List is empty, it will not be displayed.
Scan Lists
Network List
Scan List 1
View Back
M
E
N
U
Scan Lists
Scan List 2
Scan List 1
View Back
Network List
List Optns
Capacity
Rename
Select Back
Clear List
Add Group
Edit
M
E
N
U
6802972C35.book Page 93 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
