82
To make specific Vibrate settings for different calls:
1. From the main menu, select Setup
> Vi-
brate > Details.
2. Choose which type of call that you want
to modify its Vibrate settings, and press
Select.
3. Select the required setting, and press
Select. Press Back to exit
Setting the Ring Style
This sub-menu allows you to set the
incoming call ring style. Your MTH800
features nine selectable ring styles.
From the main menu, select Setup >
Volume.
Upon entry into this sub-menu, the display shows the current
ring style used.
Scroll to the desired style and press
Set. You will hear the new
ring style immediately for a few seconds. If necessary, adjust
the volume level.
Ring calls are Phone calls, PABX and Full-Duplex Private calls. Calls are
Group, Emergency and Private (in half-duplex). Vibrate Message (Vibrate
Msgs) are Status Messages and Text Messages.
If you chose Ring Calls or Messages, the settings
available are Vibe & Ring, Vibe Only or Ring Only.
If you chose Group Call, the settings available are Vibe
On or Vibe Off only.
Details...
Group Call
Vibrate Messages
Ring Calls
Select Back
Ring Calls
Vibe Only
Ring Only
Vibe & Ring
Select Back
Group Call
Vibe Off
Vibe On
Select Back
Ring Style
Style 2
Style 3
British
French
Select Back
German
6802972C35.book Page 82 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
