102
3. Return to the Home display. The display shows the net-
work ID or alias.
Selecting Trunked Mode
This sub-menu allows you to select the
mode your
MTH800 will be operating on.
To set up your operating mode:
1. From the main menu, select More >
Network > Trunked Mode
.
2. The MTH800 switches to Trunked
Mode.
Selecting Direct Mode
This sub-menu allows you to select the
mode your
MTH800 will be operating on.
To set up your operating mode:
1. From the main menu, select More >
Networks > Direct Mode
.
2. The MTH800 switches to Direct Mode.
Setting Transmit Inhibit (TXI) Mode
This mode should always be set before
entering areas where transmission is
prohibited, e.g. in hospitals or in potentially
explosive areas.
It is up to your Service Provider to ensure your own MTH800 identity is
allowed to register on other networks in your list. Some groups may not be
available on other networks.
It is not possible to switch from Direct Mode to Trunked Mode, if the
MTH800 is in Transmit Inhibit Mode.
It is not possible to switch from Direct Mode to Trunked Mode, if the
MTH800 is in Transmit Inhibit Mode.
Network
Trunked Mode
Direct Mode
Networks Sel
TXI Mode
Select Back
Networks
Trunked Mode
Direct Mode
Networks Sel
TXI Mode
Select Back
TXI Mode
Deactivate
Activate
Select Back
6802972C35.book Page 102 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
