89
The Menu
3. Scroll to Text. Press Change. Type/ edit the screen saver
text using the keypad. (For details on text editor use, see
“Writing Text” on page 114).
4. Press Done
to exit.
Setting the Backlight
Your MTH800 has 2 backlight settings:
Auto
Any key press turns the backlight on. The backlight remains
on until the pre-programmed timer runs out.
Disable
The backlight feature is disabled.
To change your backlight settings:
1. From the main menu, select Setup > Display
> Backlight.
2. Press Change.
3. Select required setting.
4. Press Done
to exit.
Setting the Wallpaper
1. From the main menu, select Setup > Display >
Wallpaper.
2. Press Change.
3. Select required setting (On/Off).
4. Press Done
to exit.
The menu options will display the Screen Saver if your Service Provider
pre-programmed this feature.
6802972C35.book Page 89 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
