49
Private Call
One-touch Dial
See “Programmable Numeric Keys” on page 20.
Calling a Number in a Message
See “Calling a Number in a Message” on page 109.
Receiving a Private Call
1. The MTH800 switches to the incoming Private Call. The display
shows the caller’s identity.
2. To answer an incoming half-duplex call, press PTT. To answer an
incoming full-duplex call (indicated by Spkr/Earpc keys), press
.
3. To end the call, press .
Making a Private PPC (Preemptive Priority Call)
1. Enter the private number and press PTT
or .
2. If the display shows the called user is
busy, press
Yes to interrupt the on-going
call.
3. You will hear a ringing tone. Wait for the
called person to answer your call.
4. Continue the call as in a regular half-duplex or full-duplex
Private Call.
Your terminal can alert you of an incoming call. Select the alert settings in
the Vibrate menu and Tones menu items
This feature is only available if set up by your Service Provider.
Yes No
David
Busy
Interrupt?
6802972C35.book Page 49 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
