85
The Menu
1. From the main menu, select Setup > Group Audio.
2. The display shows the current audio setting. When set to
Always Loud, the audio sounds from the speaker (high
audio). When set to Speaker Control, the audio will sound
from the earpiece or the speaker, per Speaker Control
key use.
3. Select the required setting.
Setting Tones
From the main menu, select Setup > Tones.
This sub-menu allows you to activate/
deactivate the MTH800 tones.
For a detailed list of tones, see “Tones” on
page 128.
Setting Keypad Tone
To activate/deactivate keypad tone at every key press:
1. From the main menu, select Setup > Tones > Keypad
Tone.
2. Scroll through the settings (On/Off).
3. Choose required setting, and press
Select, or press Back
to exit.
Setting All Tones
To activate/deactivate all tones (keypad tone and other
activity tones used in your MTH800):
1. From the main menu, select Setup > Tones > All Tones.
2. Scroll through the settings (On/Off).
3. Choose required setting, and press
Select, or press Back
to exit.
When all tones are disabled, your MTH800 switches into covert mode, and
all audio is routed to the earpiece, instead of the speaker for low audio
operation. Remember to disable this feature, when your covert operation is
complete, to return your MTH800 to high audio operation.
Tones
All Tones
Talk Permit
Keypad Tone
Select Back
Clear to send
6802972C35.book Page 85 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
