125
What to do if...
Faulty Unit
Error...
Self-test failed. An operational fault has been detected with
your
MTH800. Record the error number. Turn your MTH800
off and contact service.
Group already
exists
The group you are attempting to add already exists in the My
Groups folder.
No Group
Attachment failed.
MTH800 detached from current
talkgroup. Please wait until the
MTH800 attaches again to
the current talkgroup.
Insufficient
Visible Satellites
Your terminal is in the process of determining your location.
This may take several minutes to complete.
Insufficient
Visible Data
Your terminal is in the process of determining your location.
This may take several minutes to complete.
Limited Service
Emergency Calls, Emergency Alarms and mobility opera-
tions (e.g.: group attachment) are allowed. All other incoming
and outgoing call and data services are blocked.
List not
Attached
All talkgroups in the scan list are not attached.
List Partially
Attached
The scan list is active, but not all talkgroups are attached to
it.
Low Battery You have less than five minutes of talk time.
Message
Delivered
Indicates mail successfully delivered.
Message Failed Indicates mail delivery failure.
Mode
No Service
The
MTH800 is outside coverage. Return to coverage.
My Groups is
empty
You cannot view/delete groups when the My Groups folder is
empty.
My Groups is
full
You are not allowed to add a group to the My Groups folder
as it already contains the maximum allowed number of
groups.
Network
Trouble
Network problems. Please try again later.
Messages Message Description
6802972C35.book Page 125 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
