20
Programmable Numeric Keys
The MTH800 supports the one-touch feature that allows you
to select/activate commonly used features by pressing and
holding a numeric key. Your Service Provider should
program the numeric keys with the relevant features.
The following table lists the programmable features and their
availability in specific MTH800 states/modes. For detailed
information on the features, see the relevant section in the
user guide.
Feature Description
Talkgroup Switch Switch to a specific talkgroup
Talkgroup Scan Toggles on/off the Talkgroup Scan function
(TMO only)
Home Revert Puts the MTH800 back Home display.
DMO/TMO Toggles between DMO and TMO
Status Message Sends a dedicated status message to a
dedicated address (TMO only)
Text Message Template Sends a predefined/user defined template to
a dedicated address (TMO only)
Call Dial (Private, Phone,
PABX)
Initiates a call to a predefined entry in the
contact list (TMO only)
Vertical Flip Display Toggles on/off vertical flip
Transmit Inhibit (TXI) Toggles between activated and deactivated
TXI Mode.
Screen Saver Activates screen saver.
Backlight Adjustment Toggles on/off backlight.
If dialing via one-touch numeric key is enabled, one-touch dial is dis-
abled (see page 52).
6802972C35.book Page 20 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
