68
Satellite Mode indicates which parameters are valid upon
input. The remaining parameters are ignored. On output, the
Mode indicates which parameters have been measured or
calculated.
The possible parameters are:
• Doppler
• Doppler Uncertainty
• Code Phase
• Code Phase Uncertainty
• Data Phase
• Data Bit
• Azimuth
• Elevation
Version
1. From the main menu,
press and se-
lect More...> Location > Testpage >
Version.
2. Scroll to your selection and press Select
to access the next display.
This displays the following information about the software
used to calculate the location:
• Software Version (SW) - the version of the firmware
installed on the Phoenix Integrated Circuit (IC).
• Hardware Version (HW) - the version of the Phoenix IC
• ASIC (Application Specific Integrated Circuit) Version
• Release Code (RC)
Version
HW: 0
SW: 0
Rfrsh Back
ASIC: 0
RC: 0
M
E
N
U
6802972C35.book Page 68 Monday, August 16, 2004 9:22 PM
To Next Page
Loading...
