Moxa Technologies AWK Series - Page 54

AWK Series User Manual
54
Daylight Saving Status
Setting
Description
Factory Default
Enabled/Disabled
Enable or disable Daylight Saving Time.
Disabled
Offset
Setting
Description
Factory Default
User-specified value
Specify the offset value for Daylight Saving Time.
None
Start
Setting
Description
Factory Default
User-specified date
Specify the date that Daylight Saving Time begins.
Jan, 1st, Sun, 00.
End
Setting
Description
Factory Default
User-specified date
Specify the date that Daylight Saving Time ends.
Jan, 1st, Sun, 00
When finished, click APPLY.