76 Part Number STH034 3/12
22. Turn on the ice making water supply, reconnect
power and move the compressor rocker switch to
ON.
23. Allow the ice machine to run for 10 minutes, then
place the compressor rocker switch in the OFF
position, disconnect power and discard all ice
produced.
24. Turn ON the ice Machine power switch.
25. Replace all cleaned parts in their correct
positions:
• small washer
• assembled dispense wheel/plates
• auger
• bin cover
•motor
• gasket
• ice chute
• ice chute cover.
26. Replace the unit top with four thumbscrews and
cleanup any spills on or around the unit.
27. Reinstall all removed panels and restore power.
To Next Page
Loading...
