MULTIPLEX
You can still exploit the ad-
vantages of telemetry even if
you use a SMART SX system.
The basic requirement for this
is the use of a telemetry-
capable M-LINK 2.4 GHz re-
ceiver in the model, and - if
desired - the corresponding
MSB sensors. If you want the
telemetry values to be gener-
ated as speech output, you
need to use the special ‘Souf-
fleur’ telemetry receiver (# 4
5185): this unit picks up the
telemetry data from the mod-
el, completely independently of the transmitter, and
generates the values in spoken form in real time, as
well as vario tones and warning indicators. Please
refer to the operating instructions supplied with the
device for all further details.
8. A
DVICE AND
S
ERVICE
We have taken great trouble to formulate these oper-
ating instructions in such a way that you can quickly
and easily find answers to any questions which might
arise. However, if you still have a query regarding
your SMART SX M-LINK, please contact your model
shop in the first instance, where you will find practical
advice freely given.
The addresses of our Service Centres can be found
on our website:
www.multiplex-rc.de
under CONTACT / SERVICE
9. C
ARE AND
M
AINTENANCE
The transmitter requires no special maintenance. We
strongly recommend that you have your unit checked
at regular intervals by an authorised MULTIPLEX
Service Centre. This should occur every two or three
years; more often if you use the system heavily.
Regular checks of all working systems and radio
range are mandatory in any case.
The best method of removing dust and dirt is to use a
soft paintbrush. Stubborn soiling, such as grease and
oil, can be removed with a moist cloth and - if neces-
sary - a mild household cleaning agent. On no ac-
count use powerful cleaning agents such as white
spirit or other solvents!
Avoid subjecting the transmitter to shock and pres-
sure. The transmitter should always be stored and
transported in a suitable protective container (trans-
mitter case or bag).
10. CE
C
ONFORMITY
D
ECLARATION
This device has been assessed in accordance with Euro-
pean harmonised directives. This means that you are the
owner of a product whose design satisfies the protective
requirements of the European Community for the safe
operation of equipment.
You can view the full CE Conformity Declaration in the
form of a PDF file on the Internet at
www.multiplexrc.de in the DOWNLOADS area
under PRODUCT INFO.
11. FFC
W
ARNING
S
TATEMENTS
This device complies with part 15 of the FFC rules. Op-
eration is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE: The grantee is not responsible for any changes or
modifications not expressly approved by the party respon-
sible for compliance. Such modifications could void the
user´s authority to operate the equipment.
12. IC
W
ARNING
S
TATEMENTS
This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including inter-
ference that may cause undesired operation of the device.
13. G
UARANTEE
/
L
IABILITY
E
XCLUSION
The company MULTIPLEX Modellsport GmbH & Co. KG
accepts no liability of any kind for loss, damage or costs
which are due to the incorrect use and operation of this
product, or which are connected with such operation in any
way. Unless the law expressly states otherwise, the liability
on the part of MULTIPLEX Modellsport GmbH & Co. KG to
pay damages, regardless of the legal argument employed,
is limited to the invoice value of those products supplied by
MULTIPLEX Modellsport GmbH & Co. KG which were di-
rectly involved in the event in which the damage occurred.
This does not apply if unlimited liability is incurred accord-
ing to statutory law on account of intentional or gross negli-
gence.
We guarantee our products in accordance with the current-
ly valid statutory regulations. If you wish to make a claim
under guarantee, your initial course of action should always
be to contact the dealer from whom you purchased the
equipment.
The guarantee does not cover faults and malfunctions
which are caused by the following:
• Incorrect or incompetent use
• Maintenance carried out incorrectly, belatedly or not at
all, or not carried out by an authorised Service Centre
To Next Page
Loading...
