Munters Trio Poultry Controller - Page 61

© Munters AB, 2020 61
7.4 Sensors
•
Defining the Ammonia Sensor
•
Defining the CO2 Sensor
•
Defining the Humidity Sensor
•
Defining the Water Meter Sensor
7.4.1 D
EFINING THE
A
MMONIA
S
ENSOR
 Define one analog input port as an ammonia sensor (refer to Mapping Devices, page 50).
•
Define:
o
Offset: This is an optional correction for the ammonia sensor. Range: -10 to +10 ppm
o
Enable Mode: Enable/disable the sensor.
•
The ammonia reading shows the measured amount, including the offset.