9-6 se c u r I t y f e a t u r e s
2
Use the numeric keys to enter the four-digit protection passcode and press <Enter>.
01:PIN Number
_
3
Use the numeric keys to enter the PIN and press <Enter>.
4
When you finish, press <Reset>.
NOTE: While in Mode 1, any autodialer numbers you use must include the PIN. This also
applies to autodialer numbers used with batch transmission. (See page 4-14.)
If you choose “Mode 2”
In Mode 2, you do not have to add the PIN to the autodialer setting. Instead, you can
enter the PIN manually each time you autodial:
1
Dial the number as you normally would, using the autodialer.
The machine now asks for the PIN:
Enter PIN Number
_
2
Use the numeric keys to enter the PIN and press <Start>.
Your machine will dial the number.
Dialing from the numeric keypad while using the PIN mask
If you choose “Mode 1”
1
Enter the phone number, then press the <
*
> key and enter the PIN.
The PIN always goes last.
For example, to dial 19725550911 with a PIN of “123456,” enter 19725550911
*
123456:
Press Start
13725550911*123456_
2
Press <Start>. The PIN disappears from the display, and your machine dials the
desired phone number.
If you choose “Mode 2”
1
Enter the phone number as usual.
Press Start
13725550911_
2
Press <Start>.
Enter PIN Number
_
3
Use the numeric keys enter the PIN and press <Start>.
Your machine dials the number.
To Next Page
Loading...
Need help?
General
